Lead and Copper Data
Lead and Copper Data 2020
Lead and Copper are regulated by the Safe Drinking Water Act, under the Lead and Copper Rule (LCR). Lead and Copper samples are obtained from residential customers with lead service lines, lead solder or premise-plumbing lead components. The Action Limit is 15 ug/l for lead and 1300 ug/l for Copper. Micrograms per liter (ug/l) is equal to parts per billion (ppb). One part per billion is roughly equal to a teaspoon of water in an Olympic-size swimming pool.
Lead and Copper Data 2019
If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with lead service lines and home plumbing. CBU does not use lead materials but cannot control the variety of materials used in plumbing components of private construction.
Lead and Copper Data 2018
Customers with lead service lines, lead solder or premise-plumbing lead components: When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using the water for drinking and cooking.
Lead and Copper Data 2017
Information on lead in drinking water, test methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline (800-426-4791) or at www.epa.gov/safewater/lead.
Lead and Copper Data 2016
If you are concerned about lead in your water, you may wish to have your water tested. Contact the Office of Water Quality at firstname.lastname@example.org.
The City of Bloomington's water meets or exceeds all federal and state drinking water regulations.